冷藏式廢氣干燥處理機
◆服務的特點 Product features
制泠及氧氣操作系統,經專家精確計算,來設計數據均留20%不低于的的余量。冷卻再風機通過360度轉盤式或渦流式、活塞環式全開放式冷卻再風機及半開放式螺栓式冷卻再風機(20HP大于),運動維持,躁聲低,使用性能安全,低耗電使用期限長。能耗等級保護比好,防護衣等級保護為IP54(防污及防濺)
熱更換器、風自然空氣冷卻器應用質優熱管帶純鋁鰭片,攏流的組成熱交換成品率好、之所以體積大小小,的組成省油的suv。壓力容器封頭建材應用不銹鋼材料或冷軋鋼熱浸鍍鋅,可逃避對縮減自然空氣的2次水污染。制冷設備掌控構件特點優異。具有著供熱膨脹系數閥的節流降血壓特點,熱流旁通閥的能量是什么自動調節特點,過直流電壓、過阻抗、空調制冷劑進行高壓保障等特點。
液氣轉移法器動用風暴轉移法與不銹鋼材質的絲繩網捕霧可揮發搭配,包括液氣轉移法郊果徹徹底底,避免出現土壤水分的再次蒸發掉,為了保證冷干機的粗糙郊果。它比風暴轉移法器特點指標好,同一時間又比濾過式液氣轉移法器動用成體低,包括特點指標產品報價比。水冷卻器為好低翅紫銅管,慢水流量、多沖程,板換生產率好,持續動用不適合積垢。主動排水管道器按需設有,除水加低碳,郊果好;浮球式,微電子時控可選擇擇。外旋轉葉冷風機,狂風暴雨量、低噪音源,多自動駐車長期限。
壓力管道控制部件主設備機構設計制作有效,能夠修理清潔保養;表皮熱噴塑,造型美感,不有銹蝕;無依據裝設,進行穩步無震動,修理率低,無消費品,進行管理費少,累計進行不必親自等待歌詞。
Refrigeration and air system, the experts accurate calculation, design parameters are left more than 20% of the surplus. Refrigeration compressors adopt international advanced rotary or scroll type, piston enclosed refrigeration compressor and close partly screw refrigeration compressor (20 HP above), stable operation, low noise, reliable performance, save electricity long life. Can effect comparing high, protection grade for IP54 (dust and splash)
Heat exchanger, wind condenser copper pipe with high quality with pure aluminum fins on heat flow structure, high yield, and thus, small size, structure compact. The cylinder body materials selecting stainless steel or carbon steel galvanized, can avoid to compressed air of the secondary pollution. Refrigeration control elements adopt the most advanced Denmark danfoss (DANROSS) and the Persian LAN (SPORLAN), (ALCO) refrigeration components, excellent performance. Thermal expansion valve with the throttling step-down function, heat the by-pass energy adjustment function, over electric current, the load, cold media high voltage protection.
Liquid-vapor separator using whirlwind separation and stainless steel wire the organic combination of the trap with gas liquid separation effect of moisture, avoid completely secondary evaporation, ensure the blotting etc.is dry effect. It than cyclone separator performance is good, at the same time than a gas-liquid separator filter brand-newly type use adult, and has a low price is high performance. Water condenser copper pipe for high quality, low wing, stroke, slow flow in high thermal efficiency, use for a long time shoulds not be scaled. Automatic drainage device according to the needs, in addition to water and energy saving set, the effect is good; Float type, electronic timing can choose.The cold wind, big rotor fan air, low noise, long life. Stop frequent rev.
Parts are confined by national gb1501998 "steel pressure vessel" and GB151-1999 "tubular heat exchanger of manufacture, test and check and accept," pressure vessel safety technology supervision code "supervision. Equipment structure design is reasonable, facilitate maintenance; The surface heat spraying, beautiful appearance, not rust; No basis installation, smooth operation no vibration, maintenance rate is low, no consumables, operation cost less, without waiting for continuous operation special.
情況標準與工藝標準 Working condition and technical indexes | |
進氣濕度 The inlet temperature |
室溫型≤50℃,溫度過高型≤80℃ |
冷去方式英文 Cooling way |
風冷(油冷) |
區域室溫 Environment temperature |
≤40℃(風冷) |
負擔露點 Pressure dew point |
1.7℃~10℃(0.7 MPa) |
制熱劑 Refrigerants |
R-22或按照其的客戶追求可用R134a,R404 a,R507等無氟生態環保制冰劑。 |
進氣負擔 The inlet pressure |
0.2~1.0MPa(6.4 MPa下列學習進貨) |
有壓力損害 The pressure loss |
≤0.02 MPa |
冷卻后水取水溫差 Cooling water inlet water temperature |
≤32℃(油冷) |
冷卻水系統水進水量壓強 Cooling water feed water pressure |
0.15~0.4 MPa(散熱) |
◆通常科技產品參數 Main technical parameters
ADH |
-5F |
-10F |
-20F |
-30F |
-60F |
-75F |
-120F |
-150F |
-200F |
-250F |
-300F |
-400F | |
辦理量 Capacity m3/min |
0.7 |
1.6 |
2.6 |
3.8 |
7.0 |
8.5 |
13.5 |
17 |
23 |
27 |
34 |
45 | |
操作壓差 Work pressure |
| ||||||||||||
露點體溫 Dew point temperature |
| ||||||||||||
制冷機劑 Refrigerants |
R-12 |
| |||||||||||
供電 Power |
|
| |||||||||||
壓解機電功率 Compressor power(KW) |
0.18 |
0.28 |
0.6 |
0.75 |
1.1 |
1.3 |
2.2 |
2.9 |
3.7 |
4.8 |
5.5 |
7.5 | |
風機三相異步電機電功率 Fan motor power(W) |
30 |
170 |
170 |
180 |
300 |
300 |
510 |
510 |
600 |
720 |
900 |
1200 | |
音頻接口規格 Interface size |
ZG1/2" |
ZG1" |
ZG1" |
ZG1.5" |
ZG1.5" |
ZG2" |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL | |
性能圖片尺寸 Appearance and size |
長L(mm) |
530 |
800 |
800 |
800 |
1100 |
1100 |
1550 |
1400 |
1550 |
1800 |
1900 |
2000 |
寬W(mm) |
360 |
450 |
450 |
450 |
600 |
600 |
650 |
780 |
780 |
780 |
950 |
950 | |
高H(mm) |
490 |
970 |
970 |
970 |
1250 |
1250 |
1480 |
1580 |
1580 |
1580 |
1800 |
1800 | |
毛重 Weight(kg) |
50 |
95 |
100 |
100 |
210 |
250 |
350 |
470 |
550 |
650 |
800 |
1000 |