靜電粉末噴涂機械系列產品

STR-NKP-1型管網內部噴涂料器  Spraying machine for piping inner wall

◆不適用依據 Applicable scope

可應用于于孔洞及大型供水pvc排水管道的壁內噴金屬乳膠漆，它是借助無氣噴金屬乳膠漆機輸送機來的直流高壓金屬乳膠漆，利用特別制定的噴口，使金屬乳膠漆吸霧后隨便養成音箱喇叭形（園錐型、塊實心），平均地噴在供水pvc排水管道內表面層，最終得以滿足供水pvc排水管道的噴金屬乳膠漆。 NKP-1型首要采主要用于Ф50-Ф300mm的通道，水性金屬漆用戶粘度不允許遠超80秒（4號福特杯）。若果工業油漆107硅橡膠粘度高過80秒，用加萃取劑稀釋溶液。NKP-1型大多上易受排水管道寬度要求，但最佳不生長于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

施工方框圖 Installation to which